Happy Holidays

From all at Miss L Reptile, we hope all your reptile wishes come true this year! Thank you to everyone who reads this blog, hope you enjoyed the experience and come back in the new year. All the positive comments makes all the hard work and research worth while.

Bumblebee Ball Python

Bumblebee Royal Python

Blaze the Bumblebee

Penny Pinstripe Royal Python

Penny Pinstripe Ball Python

Early Christmas Present

You guessed right, I finally got another addition! I think at this rate it will never end! I am now on snake number six and reptile number eight. After all, one does not simply buy one reptile!

We have named the new snake Flora as she is a butter royal python that we hope will be a future breeder for our bumblebee. She is settling in well and even accepted a feed the day after we collected her.The cutie was bred by Mike Wilbanks and purchased in Hamm, Germany by Eddie at Reptile Hunter. 

Flora

Flora

In other news: I have also took reptile keeping even further by getting my first reptile ink. Due to having type one diabetes, my new tattoo is of a leopard gecko holding a type one diabetes ribbon.

New Ink

Male Royal Python Ready to Breed Before Female?

At the moment I have a male ball python that is ready to breed although, my female is still too young and nowhere near the correct breeding weight of 1500g. After conducting much research online and talking to various breeders I have discovered that it's important not to let males get overweight, especially if one is looking to produce good fertile eggs.

At present moment in time, my male is sitting at 700g. This means that he is ready to breed and putting on weight rapidly. This is a bit of a problem as my female needs to wait at least another two years before I could consider breeding. This poses a problem as males can become more lazy and not produce good quality sperm when over 1200g.

Large Ball Python

This means that I will have to either purchase a female that is breeding weight or change the feeding routine of the male. Due to lack of space I have decided to opt for a different feeding routine. When the male reaches 1000g I will switch to a smaller size feeding item every second week whilst keeping the normal size prey. By doing so, I hope to achieve a balanced weight of around 1100g without it declining or increasing majorly. Furthermore, if he does fast there is plenty of fat reserves to sustain him for a good few months as we all know royal pythons can be picky!

Brumation

There is conflicting advice regarding if brumation is beneficial for your reptiles. If you do not know already about brumation and what it means, please have a look at the next section of this post.

Brumation - What is it?

Brumation is the process of which reptiles undergo during the winter months in the natural environment. It involves the reptile becoming more slow with their movements in order to conserve energy to survive. Reptiles, being cold blooded, require heat in order to be active, so if there is very little heat, they won't move about as much. Furthermore, they will go off their food in order to clear out their stomachs for the brumation period. This is logical as you do not want rotting food in their digestive system. 

If brumating, you will want to gradually drop the temperature over around a month. Do NOT suddenly drop the temperatures as this can kill your animal. Please refer to the temperature section of this post to find out about what temperature should be at the end of this month. Same rule after brumation- gradually raise the temperature back up to what it normally is over the course of one month or so.

After the brumation period, reptiles such as royal pythons tend to go back on their food (quite heavily) before searching for a mate. Following mating, the female will form and lay the eggs which uses the animal's fat reserves. This is why they feed heavily after brumation. In captivity, some breeders lower the temperatures for their breeding reptiles in order to trigger the brumation response. The belief is that by brumating the reptiles, they will lay more eggs and are more fertile compared to the reptiles that breed and do not undergo brumation, although this is disputed by other breeders who do not brumate their reptiles and produce fertile, healthy animals. 

Reptiles can undergo brumation by themselves, even if the temperature is not low enough in their enclosure. The most common signals are refusing feed and sleeping more/slowing down (becoming more lethargic). They also may spend more time on the cool end of the enclosure.

Brumation Temperature

The ambient temperature for brumation to be successful is generally around the 40-50 degrees Fahrenheit mark (4-10 degrees Celsius).   When I first found this out, I was shocked that it was so low but don't forget- in the wild, reptiles would borrow underground to seek this heat as the ambients above ground may be in the minuses. 

Pros of Brumating

It is commonly recognised that brumation increases the probability of fertility in breeding, although further scientific evidence is required to ultimately prove this theory.

By brumating your reptile, you are replicating their natural environment.

Brumation also helps by giving the reptile's digestive system a break. 

It may contribute to fighting obesity in reptiles.

Cons of Brumating

If temperatures are not kept accurate, aka they fall too low, your reptile(s) may suffer health problems and even worse- die.

It may cause respiratory illness (RI) due to low ambient temperatures. This can lead to painful treatment and high vet bills.

Conclusion

I can see the benefits of brumation, however, I would not personally brumate my reptiles unless they undergo it naturally themselves. If you are keeping your reptiles as pets only and don't plan on breeding, my advice would be to refrain from brumating as it is not necessary. If you are breeding them and want a better success rate, I would suggest brumation but do more research on the process of brumating your particular reptile. 

Keeping Reptiles Warm In Winter - Ambient Temperatures

If you are worried about what the winter may bring for your reptiles regarding ambient temperatures, this post is for you.

Let me start by saying everyone is different when it comes to what they consider as 'acceptable ambient temperature' but I would say that it is generally practiced that around 70 Fahrenheit (20 Celsius) is the minimum that you should keep the ambient temperatures, assuming you're not brumating your reptiles. Ensure that your hot spot is what it should be and there is a clear temperature gradient throughout your reptiles' enclosures.

For more information on the various types of heating, please refer to my heating reptiles post.

During a power cut, it is very helpful to have a backup heat source. Some people have generators that they can use in case of a power cut but others do not have the privileges for a generator (I being one of them). Instead, I stock up on heat packs. These are packs that come in a variety of sizes which when opened, begin to heat up. They take a while to heat but they last some 12 hours or so. Usually, these heat packs are used when transporting reptiles. Please note, I use these as my reptiles are not huge. If you have a large reptile such as a burmese python, you will most likely need a generator if your electric cuts out for a long period of time. Alternatively, you can keep your reptiles warm for a short period of time by using your body heat. Place your reptile in a pillow case and hold them close to your body. The pillow case will allow air flow and will keep them from exploring around your room.

Remember to keep checking your animals throughout the cold snap to ensure they are eating, drinking, shedding, excreting and behaving as normal. I tend to handle my reptiles less during the winter as the ambients are not as high as what they are during the summer months.

My New Addition Mauve

Recently I was contacted by a local breeder who had a ball python that was unable to breed. There is also a small bump on the python's nose. The breeder explained that the royal needs a good loving and caring home, so my partner and I decided to take him on and keep him as a pet to ensure that he will be well cared for. We have named the python Mauve as he is a Mojave and it fits with our name by colour scheme theme although I know he is not purple.

He is currently the largest ball python weighing in at 950 grams (approximately). Mauve seems to be settling in well and adjusting to his new environment. He seems to enjoy being handled and is continuously attempting a breakout from his enclosure.

I must admit, it feels rewarding to take in and care for an animal that is healthy but no one else may want due to it having slight problems with looks and or breeding. I hate the fact that some people would go as far as to euthanize such animals and that breaks my heart when they can have a good home and be loved.  

This is Mauve, the special little guy.

Mojave ball python.

Escaped Reptiles

One of the most important factors when keeping a reptile is housing. I'm not talking about heating, decor, bedding or lighting, but the fact your animal requires an escape proof enclosure. Reptiles are natural escape artists and will use any gap big enough to their advantage. It's vital to ensure that if your housing has any gaps, that your animal can't fit through them. It's also important to have locks on vivariums, although always remember that vents and very small drilled holes will be needed for a steady flow of air. 

When it comes to ensuring that my reptiles are secure, I have locks fitted to both my vivarium and rack system. I always check that the locks are correctly in place after handling and maintenance. My motto is "close it, lock it, check it." I have also sealed any large gaps which, could be used as an escape route. I learned this the hard way, after one of my leopard geckos got under a gap in a tank divider. I also was lucky at the time to notice that there was also a gap at the back of the tank. Luckily the Leo had not discovered it. The gaps did not appear large enough for her to get out off, so be prepared to be shocked at what great escape artists they make!

Vivarium lock, available from most pet shops

Fitted vivarium lock

This would be a more important factor when dealing with venomous reptiles as the rules on their housing is different to that of non "hot" animals. It is highly recommended that all venomous animals should have a locked enclosure at all times, bar during feeding or maintaining their housing. They should be housed in a secure non-tip vivarium and furthermore, the reptiles should be kept in a secure room with two doors in case of escape. The room has to be designed to contain an escaped animal without posing a threat to the public. Don't forget: in the UK, it is illegal to keep any venomous reptile without acquiring a DWA license. 

HOW TO FIND ESCAPED ANIMALS

This really depends on where the reptile escaped from, for example if it was in your house or during transportation.

The first place to look would be anywhere warm as reptiles need heat to control their temperatures. I have heard of cases when an escaped animal has been found at the back of a television, fridge, computer, anything that gives off heat. If this method is not successful, the next option is checking any place that would make a good and secure hide, under tight spaces or places they are able to climb: for example, inside a wardrobe or chest of open drawers. If this is still not successful, you could try putting flour across door ways as this could let you see what room the reptile is in if they move from room to room. The other trick is put down newspaper and see if you can hear the animal moving through it at night, if it is a nocturnal species.

Don't sit back and let this happen. Check all locks!

Another option would be to purchase and set a minnow trap. This is a type of square cage with a funnel at either end. They are designed to enclose the animal and prevent them from finding a way out. Always make sure the trap is the correct size for your reptile as avoiding injury or death is vital for the safety of your animal. To set the trap I recommend using soiled rodent bedding as this will incite snakes into the trap. I am not sure if this method would be suitable for lizards as it may cause some species to drop their tail due to stress. 

Another possible way to catch a lizard is to set up a basking spot and the lizard may use it during the day. In most cases, the animal will not travel further than the room that it was housed in so check the room thoroughly. Everywhere mentioned above and under furniture, in side of shoes, on top of curtains any place you can think of.